For training apply the"white NANOX training wax" at about 125 Celsius.

Remove the still lukewarm wax with a scraper and the NANOX hard nylon brush

Nanox black racing wax

1. apply "NANOX black racing wax" at a temperature of 140 Celsius
    
2. wait about 2 min. until the wax is lukewarm
    
3. remove wax with a sharp scraper
    
4. brush (out) the wax thoroughly,whereby the NANOX hard nylon brush has to be kept at right angles to the ski
    
5. do 2 or 3 training runs (SG and downhill only 1)
    
6. the day before the race apply a very thin layer of SUPERNANO and brush it (in) with firm pressure in both directions-with the brush held paralel to the ski- until the coating is shiny and there are no more residues.
    
7. before slalom and giant slalom do 1 run and before SG and downhill ski a short distance(e.g. to the start).No more brushing is necessary.

Important advise
To guarantee maximum performance of NANOX it is required that the structure of the coating conforms to the snow conditions and that the ski has been ground absolutely plane and fiber-free.